Landscaped Concrete Steps

Concrete Steps in Commercial Landscaping

Concrete Steps are a vital part of hard landscaping or hardscaping on sloping or uneven commercial landscapes.

Concrete, being one of the most used construction materials, has taken over the construction industry not only as a structural material but also as a commercial landscaping material for the versatility it provides. It is easy to pour into any shape, size, or aesthetic.

Commercial Concrete Steps - Reds Landscaping & Design
Commercial Concrete Steps at Hume Global Learning.

Commercial Concrete Steps

Commercial concrete steps are no different for they can be made—in-situ concrete steps or pre-cast—in any form. For these reasons, concrete has proved itself commonplace in the area of commercial public spaces, not only because of the afore-mentioned reasons, but also because of how cheap it can be as compared to other materials.

Commercial Concreting Project - Reds Landscaping & Design
Commercial Landscaping at Balwyn community centre. Commercial Concrete Steps use safety hand rails and anti-slip studs to ensure a safe public space is maintained.

Standards and Specifications for Concrete Steps

Now that we have already talked about how marvellous concrete is, let’s dive into the technicalities that come along with it. Concrete, unlike any other construction material that can be easily bought and installed, has to be designed for its strength. If it is poured insitu concrete, it can be designed using different standards and procedures that differ slightly from country to country—the BS method and the ACI method being the most famous ones around the globe. However, if you are planning to order pre-mixed concrete from a concrete batching plant, mentioning the strength and workability you require would be enough — the experts there would do the rest. The strength shall again be prescribed by the designer, but to have a rough idea, 30 MPa would suffice for concrete steps. The 30 MPa concrete would perform better if reinforced with steel or CFRP.

Removing Formwork for a curved insitu concrete seat - Reds Landscaping & Design
Removing Formwork for a curved insitu concrete steps.

One can make the strongest concrete yet fail to make a meagrely standing concrete step flight if it isn’t resting on a proper foundation. The ultimate load goes to the soil underneath, and therefore a proper foundation which transmits the load to the soil is always needed. It's best if it’s left to the engineers, for they would calculate the weight of the concrete steps and see which footing would work the best.

Hanson Bokhara Exposed Aggregate Concrete - Reds Landscaping & Design
Exposed aggregate concrete is ideal for garden steps and stairs to help maintain grip. Recent sealing of the concrete makes it appear slightly darker.


Construction of Concrete Steps

Once you have sorted out the footing and the strength of concrete, it is now time to start the construction.

  1. The site shall be dug out and the footings shall then be poured—this would require steel as reinforcement.
  2. After the footings are hard and cured, the form work for concrete steps shall be placed—formwork for landings shall be placed accordingly, for they are supposed to be placed after a flight of steps.
  3. Form work for access ramps for wheel chairs shall also be placed as per the architectural design requirements, which usually takes care of the legal considerations as well in that area.
  4. Steel bars as reinforcement – if designed in steps – shall then be placed and held via concrete biscuits/spacers.
  5. The concrete will then be poured.
    1. How to pour? Well, the answer to this isn’t simple because there are multiple techniques. The easiest one would be using a chute or a pipe, but care has to be taken. Concrete can segregate if it is dropped from higher heights.
    2. When pouring, the concrete should be compacted using a vibrator. This compacts the concrete, resulting in fewer voids and higher strength. It also ensures lower permeability, which makes concrete durable and avoids the ingress of different chemicals.
    3. Additionally, one should make sure that a sufficient quantity of concrete is present on site for the pouring to be done well in one go. Pouring concrete in batches can result in cold joints, which would not only affect the aesthetics but would also affect the quality of concrete as it allows water to seep in that takes other chemicals that are usually detrimental to the concrete. This includes multiple salts and acids.
Commercial Concrete Steps - Reds Landscaping & Design
Commercial Concrete Steps at Hume Global Learning.
  1. After pouring, the surface is finished off either plain or in an exposed aggregate style.
  2. It is then left to harden for 24 hours—sometimes covered with plastic so it can cure.
  3. Curing is then done for 7 to 28 days to allow the concrete to gain strength.

For safety reasons (unless avoided in architectural design for aesthetic reasons), hand rails should also be installed. This can be done by installing balusters when pouring concrete. Metal plates or other nosing covers can be used in order to highlight steps and in order to improve friction between the shoes and concrete steps.

In-situ retaining wall and steps - Reds Landscaping & Design
In-situ retaining wall and steps

Apart from this method, there are other construction techniques too, which are usually chosen based on the complexity of the construction site—its soil conditions, access, etc. A civil engineer or commercial landscaping company should be hired in order to suggest, design, and execute complex concrete steps.

Concrete steps landscaping can be further improved by using aesthetic tactics such as lighting, which shall be installed after the pouring. The electrical connections can be made in advance in order to hide wiring under concrete. Furthermore, exposed aggregate concrete can also be used—made using different techniques—to enhance the look even further. Exposed aggregate concrete improves friction and, ultimately, safety in rainy seasons, apart from adding to the aesthetics. Similarly, moulds can be used to give concrete a natural stone-like aesthetic. Pigmented cements are another option to create your desired concrete step look.

In-situ retaining wall and Concrete Steps - Reds Landscaping & Design
In-situ retaining wall and Concrete Steps.


Related Landscaping Information from Red's Landscaping and Civil

Landscape Design Trends

Landscape Design Melbourne

Landscaping Melbourne

Commercial Landscaping

Cantilever Concrete or Concrete Floating

In-situ Concrete

7 pluses for Exposed Aggregate Concrete Driveways

7 Reasons to Choose Concrete Pavement

3 Best Types of Concrete Retaining Wall

7 Great Reasons to choose Permeable Concrete

7 Great Reasons to choose Permeable Concrete

Further Landscaping Reading

Concrete Basics

© 2022 Reds Landscaping and Civil Melbourne